ZX-Next core para ZX-Uno
Re: ZX-Next core para ZX-Uno
If I remember, the TBBlue files has the latest esxDOS with 128 ROM patch.
Update the esxDOS in UNO too.
Update the esxDOS in UNO too.
Re: ZX-Next core para ZX-Uno
Thanks. I tried but it didn't work.BCH escribió: Aqui lo encontre:
viewtopic.php?f=27&t=448&hilit=churrera&start=30#p5785
This is what I did:
1) From the Firmware1.06.rar file, SDCard folder, I extracted TMP & TTBLUE folders, and TTBLUE.FW file to SD card root folder.
2) From ESXDOS 0.8.6 beta 5.1 file I extracted esxmmc.bin file, renamed it to esxmmc.rom, and replaced the one inside the TTBLUE folder.
The core boots properly, the ESXDOS screen detects my SD card and ESXDOS seems to load (yo get the usual OK, and the usual error on RCT.SYS that is expected). But then not only the NMI (F10) resets the core, but also the dot commands doesn't work at all, all them return "Nonsense in basic".
Re: ZX-Next core para ZX-Uno
Do you mean a beta above 5.1?Turrican escribió:If I remember, the TBBlue files has the latest esxDOS with 128 ROM patch.
Update the esxDOS in UNO too.
Is that finally public, I thought only the NMI.SYS file had been modified.
Re: ZX-Next core para ZX-Uno
You must replace the the esxdos.sys file, too.Uto escribió:Thanks. I tried but it didn't work.BCH escribió: Aqui lo encontre:
viewtopic.php?f=27&t=448&hilit=churrera&start=30#p5785
This is what I did:
1) From the Firmware1.06.rar file, SDCard folder, I extracted TMP & TTBLUE folders, and TTBLUE.FW file to SD card root folder.
2) From ESXDOS 0.8.6 beta 5.1 file I extracted esxmmc.bin file, renamed it to esxmmc.rom, and replaced the one inside the TTBLUE folder.
The core boots properly, the ESXDOS screen detects my SD card and ESXDOS seems to load (yo get the usual OK, and the usual error on RCT.SYS that is expected). But then not only the NMI (F10) resets the core, but also the dot commands doesn't work at all, all them return "Nonsense in basic".
I don´t remember if it is in the SYS or BIN folder.
Re: ZX-Next core para ZX-Uno
But the esxdos.sys file is supposed to be already that one, it's the same beta 5.1 that is installed with the ZX-Uno instructions. I'll try other combinations later anyway, many thanks!Turrican escribió:You must replace the the esxdos.sys file, too.Uto escribió:Thanks. I tried but it didn't work.BCH escribió: Aqui lo encontre:
viewtopic.php?f=27&t=448&hilit=churrera&start=30#p5785
This is what I did:
1) From the Firmware1.06.rar file, SDCard folder, I extracted TMP & TTBLUE folders, and TTBLUE.FW file to SD card root folder.
2) From ESXDOS 0.8.6 beta 5.1 file I extracted esxmmc.bin file, renamed it to esxmmc.rom, and replaced the one inside the TTBLUE folder.
The core boots properly, the ESXDOS screen detects my SD card and ESXDOS seems to load (yo get the usual OK, and the usual error on RCT.SYS that is expected). But then not only the NMI (F10) resets the core, but also the dot commands doesn't work at all, all them return "Nonsense in basic".
I don´t remember if it is in the SYS or BIN folder.
Re: ZX-Next core para ZX-Uno
It´s not the same.
You must replace it.
You must replace it.
Re: ZX-Next core para ZX-Uno
No. ZX-UNO includes 0.8.6 beta4. At this moment we do not support higher version than 0.8.6 beta4, because that one is well known and tested for a long time. If you want to flash a different version in flash, you should do at your own risk.Uto escribió: But the esxdos.sys file is supposed to be already that one, it's the same beta 5.1 that is installed with the ZX-Uno instructions. I'll try other combinations later anyway, many thanks!
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA
Re: ZX-Next core para ZX-Uno
I belive NMI.SYS has not been modified. Only ESXDOS.SYS and the ESXDOS rom (slightly)Uto escribió:Do you mean a beta above 5.1?Turrican escribió:If I remember, the TBBlue files has the latest esxDOS with 128 ROM patch.
Update the esxDOS in UNO too.
Is that finally public, I thought only the NMI.SYS file had been modified.
Ok, I just readed Quest post.
The problem is then that the ZX-UNO Spectrum core is running 0.8.6 beta4 and the TBBlue is running 0.8.5
Última edición por BCH el 14 Sep 2016, 13:31, editado 2 veces en total.
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: ZX-Next core para ZX-Uno
Yes, the ESXDOS rom in TBBlue is version 0.8.5.
For update, replace the file \TBBLUE\ESXMMC.ROM for the 0.8.6 version. In the ZIP package rename the "esxmmc.bin" file to "esxmmc.rom".
For update, replace the file \TBBLUE\ESXMMC.ROM for the 0.8.6 version. In the ZIP package rename the "esxmmc.bin" file to "esxmmc.rom".
BCH escribió:Is maybe because the TBBlue core is using a different ESXDOS version? The ESXDOS.SYS file (inside the SYS folder) and the ESXDOS ROM must match in order to work properly.Uto escribió: 1) I'm using the same SD card I use for ZX-Uno's Spectrum Cores, and so I didn't extract the SYS and BIN folders from the RAR file. As result - or maybe it has nothing to do with it - ESXDOS NMI doesn't work (makes a reset). I see the SYS folder has a old_esxdos file, so maybe ESXDOS has been patched? If so, is there any way to fix that so SD card can be shared? It doesn't make too much sense to have two different cards for two Specturm cores
Re: ZX-Next core para ZX-Uno
Thanks Flavio. Now I only have a problem: where is the ESXDOS 8.0.6 beta4 file located?. After some googling I only found it at Velesoft's site, but file is corrupt (or at least I cannot unzip it).
Wouldn't be a bad idea if a setup for all thise beta versions would be avaliable, it's a pain to find the latest, but finding the preovious is even more difficult
Wouldn't be a bad idea if a setup for all thise beta versions would be avaliable, it's a pain to find the latest, but finding the preovious is even more difficult