Gracias por la explicación, pero creo que me quedaré con el core T24, ¡no quiero tentar la suerte abriendo la carcasa!ManuFerHi escribió:Toca con el dedo el cristal de 4.43mhz verás que se arregla la imagen, suele pasar ya que los componentes tienen su tolerancia y el C1 en lugar de 4.3pf quizás en tu placa vaya mejor uno de 4pf o 5pf...
EXP26 is ready for you to test
Re: EXP26 is ready for you to test
Re: EXP26 is ready for you to test
Hi! Is it possible to add undocumented Z80 instructions such as "SLI r,(IY+s)" (opcode: FD_CB_32_32 и FD_CB_01_07) also?
Now I tested EXP26_BIOS0.73 firmware. And OSCOSS megademo still falls into the recursive loop.
Now I tested EXP26_BIOS0.73 firmware. And OSCOSS megademo still falls into the recursive loop.
Re: EXP26 is ready for you to test
¿Qué archivo es la versión 0.77? ¿FIRMWARE.ZX1 o FIRMWARE.ZX2?mcleod_ideafix escribió: ↑09 Feb 2018, 00:37This includes the new OPQASPCM feature by Quest.
And, of course, the PZX player.
Please, read instructions inside the ZIP file.
Enjoy and report experiences
Si no he leído mal el último ESXDOS estable es la versión EXP27.
¿Dónde está el archivo actualizado ESXDOS.ZX1?
¿Qué diferencia hay entre las extensiones .ZX1 y .ZX2?
¿Dónde está el archivo actualizado conteniendo las carpetas BIN y SYS que indica Uto?
Miro el repositorio y me lío más.
- mcleod_ideafix
- Mensajes: 831
- Registrado: 27 Sep 2015, 00:14
- Ubicación: Jerez de la Frontera
- Contactar:
Re: EXP26 is ready for you to test
EXP28 fixes that. Also, thanks for the tip about that undocumented instruction. I never figured out why OSCOSS failed that part (I assume you mean the part in which the girl is being built from bottom to top)
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
Re: EXP26 is ready for you to test
Acabo de ejecutar esa demo en modo Pentagon con el core EXP27-160820 y no se me ha colgado. En mi distribución del 20.08.2020 se encuentra en la carpeta /SPECCY/PENTAGONmcleod_ideafix escribió: ↑29 Ago 2020, 16:47EXP28 fixes that. Also, thanks for the tip about that undocumented instruction. I never figured out why OSCOSS failed that part (I assume you mean the part in which the girl is being built from bottom to top)
- mcleod_ideafix
- Mensajes: 831
- Registrado: 27 Sep 2015, 00:14
- Ubicación: Jerez de la Frontera
- Contactar:
Re: EXP26 is ready for you to test
Wow! EXP28 doesn't exist! I meant EXP27!desUBIKado escribió: ↑29 Ago 2020, 21:52Acabo de ejecutar esa demo en modo Pentagon con el core EXP27-160820 y no se me ha colgado. En mi distribución del 20.08.2020 se encuentra en la carpeta /SPECCY/PENTAGONmcleod_ideafix escribió: ↑29 Ago 2020, 16:47EXP28 fixes that. Also, thanks for the tip about that undocumented instruction. I never figured out why OSCOSS failed that part (I assume you mean the part in which the girl is being built from bottom to top)
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA