EXP26 is ready for you to test

Avatar de Usuario
dustin
Mensajes: 50
Registrado: 15 Ene 2016, 18:50

Re: EXP26 is ready for you to test

Mensaje por dustin » 02 May 2018, 21:14

ManuFerHi escribió:Toca con el dedo el cristal de 4.43mhz verás que se arregla la imagen, suele pasar ya que los componentes tienen su tolerancia y el C1 en lugar de 4.3pf quizás en tu placa vaya mejor uno de 4pf o 5pf...
Gracias por la explicación, pero creo que me quedaré con el core T24, ¡no quiero tentar la suerte abriendo la carcasa! ;)

softlight
Mensajes: 2
Registrado: 08 Jun 2018, 23:41

Re: EXP26 is ready for you to test

Mensaje por softlight » 09 Jun 2018, 00:11

Hi! Is it possible to add undocumented Z80 instructions such as "SLI r,(IY+s)" (opcode: FD_CB_32_32 и FD_CB_01_07) also?
Now I tested EXP26_BIOS0.73 firmware. And OSCOSS megademo still falls into the recursive loop.

honda
Mensajes: 73
Registrado: 10 Mar 2017, 13:09

Re: EXP26 is ready for you to test

Mensaje por honda » 23 May 2020, 22:25

mcleod_ideafix escribió:
09 Feb 2018, 00:37
This includes the new OPQASPCM feature by Quest.
And, of course, the PZX player.

Please, read instructions inside the ZIP file.

Enjoy and report experiences :)
¿Qué archivo es la versión 0.77? ¿FIRMWARE.ZX1 o FIRMWARE.ZX2?

Si no he leído mal el último ESXDOS estable es la versión EXP27.
¿Dónde está el archivo actualizado ESXDOS.ZX1?
¿Qué diferencia hay entre las extensiones .ZX1 y .ZX2?
¿Dónde está el archivo actualizado conteniendo las carpetas BIN y SYS que indica Uto?

Miro el repositorio y me lío más.

Avatar de Usuario
mcleod_ideafix
Mensajes: 831
Registrado: 27 Sep 2015, 00:14
Ubicación: Jerez de la Frontera
Contactar:

Re: EXP26 is ready for you to test

Mensaje por mcleod_ideafix » 29 Ago 2020, 16:47

softlight escribió:
09 Jun 2018, 00:11
Hi! Is it possible to add undocumented Z80 instructions such as "SLI r,(IY+s)" (opcode: FD_CB_32_32 и FD_CB_01_07) also?
Now I tested EXP26_BIOS0.73 firmware. And OSCOSS megademo still falls into the recursive loop.
EXP28 fixes that. Also, thanks for the tip about that undocumented instruction. I never figured out why OSCOSS failed that part (I assume you mean the part in which the girl is being built from bottom to top)
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA

Avatar de Usuario
desUBIKado
Mensajes: 1002
Registrado: 05 Ago 2016, 22:33

Re: EXP26 is ready for you to test

Mensaje por desUBIKado » 29 Ago 2020, 21:52

mcleod_ideafix escribió:
29 Ago 2020, 16:47
softlight escribió:
09 Jun 2018, 00:11
Hi! Is it possible to add undocumented Z80 instructions such as "SLI r,(IY+s)" (opcode: FD_CB_32_32 и FD_CB_01_07) also?
Now I tested EXP26_BIOS0.73 firmware. And OSCOSS megademo still falls into the recursive loop.
EXP28 fixes that. Also, thanks for the tip about that undocumented instruction. I never figured out why OSCOSS failed that part (I assume you mean the part in which the girl is being built from bottom to top)
Acabo de ejecutar esa demo en modo Pentagon con el core EXP27-160820 y no se me ha colgado. En mi distribución del 20.08.2020 se encuentra en la carpeta /SPECCY/PENTAGON

Avatar de Usuario
mcleod_ideafix
Mensajes: 831
Registrado: 27 Sep 2015, 00:14
Ubicación: Jerez de la Frontera
Contactar:

Re: EXP26 is ready for you to test

Mensaje por mcleod_ideafix » 29 Ago 2020, 22:20

desUBIKado escribió:
29 Ago 2020, 21:52
mcleod_ideafix escribió:
29 Ago 2020, 16:47
softlight escribió:
09 Jun 2018, 00:11
Hi! Is it possible to add undocumented Z80 instructions such as "SLI r,(IY+s)" (opcode: FD_CB_32_32 и FD_CB_01_07) also?
Now I tested EXP26_BIOS0.73 firmware. And OSCOSS megademo still falls into the recursive loop.
EXP28 fixes that. Also, thanks for the tip about that undocumented instruction. I never figured out why OSCOSS failed that part (I assume you mean the part in which the girl is being built from bottom to top)
Acabo de ejecutar esa demo en modo Pentagon con el core EXP27-160820 y no se me ha colgado. En mi distribución del 20.08.2020 se encuentra en la carpeta /SPECCY/PENTAGON
Wow! EXP28 doesn't exist! I meant EXP27! :D
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA

Responder