DB9 output on ZXUNO +

Dudas, cuestiones, sugerencias y peticiones en general sobre el proyecto / Questions and requests about the project
Responder
zx81zx81
Mensajes: 5
Registrado: 26 Feb 2020, 22:57
Contactar:

DB9 output on ZXUNO +

Mensaje por zx81zx81 » 03 Mar 2020, 22:05

Hi Folks,

I am trying to build my own DB9 output on ZXUNO+ to connect a Joystick and enjoy Atari 2600 core (since i didn't succeed to make it to work with the keyboard).

I was googling and looking here in this forum, but i was not able to find any hint or answer for the ZXUNO+.
There is an extension here https://www.antoniovillena.es/store/pro ... db9-addon/, but out of stock, that is using the extension connectors.

Código: Seleccionar todo

Ext1   [o] .... x17 [o]
        P01 .....   P17
 Ext2  [o] ... x16 [o]
 Ext3  [o] ... x16 [o]
I was able to find the pinout of the Ext1 connector using a multimeter :
Ext1 :
P01 - GND
P02 - Red
P03 - CSync
P04 - VSync
P05 - Bleu
P06 - Audio R
P07 - Audio L
P08 - Green

When i zoom the picture of the vgadb9-addon i am seeing connections between P09, P10 etc ... pins to the DB9 male connector.
So i suppose Up/Down/Left/Right/Fire signals are sitting somewhere around the P09 pins and next.

But, before to burn my ZXUNO+ i would like to know if someone has the official pinout of Ext1 ?

Any help would be appreciated :maestro:

Regards,

Zx

Avatar de Usuario
antoniovillena
Mensajes: 2621
Registrado: 27 Sep 2015, 20:41

Re: DB9 output on ZXUNO +

Mensaje por antoniovillena » 05 Mar 2020, 22:08

Hi

Here you have the eagle file for the edge expansion. So you can see where is mapped the joystick.
Adjuntos
edge.zip
(36.11 KiB) Descargado 401 veces

zx81zx81
Mensajes: 5
Registrado: 26 Feb 2020, 22:57
Contactar:

Re: DB9 output on ZXUNO +

Mensaje por zx81zx81 » 07 Mar 2020, 00:31

Many thanks !

Avatar de Usuario
antoniovillena
Mensajes: 2621
Registrado: 27 Sep 2015, 20:41

Re: DB9 output on ZXUNO +

Mensaje por antoniovillena » 19 Abr 2020, 00:29

I put here the pinout of that connector for people don't have Eagle installed.

Note: L-VGA and R-VGA are left and right audio channels respectively. VCC is 5V. ROUT, GOUT and BOUT are red, green and blue component for VGA and RGB Scart. The rest of the names PXX are equivalent to the LX9 FPGA pinout.
Adjuntos
expansion_pinout.png

Responder