Log of development zx-uno network tools.
Re: Log of development zx-uno network tools.
You need WiFi-addon or VGA+WiFi addon.
You may ask about it Antonio Villena - memberlist.php?mode=viewprofile&u=52
I've made it by myself.
Schematics here: https://github.com/antoniovillena/zxuno ... o/wifi.sch
You can see it via https://www.schematics.io site.
If you want soldier it by yourself, you need 1 ESP-12E/ESP-12F controller, 10K resistor and some wires(plus opt. row of pin connectors).
You may ask about it Antonio Villena - memberlist.php?mode=viewprofile&u=52
I've made it by myself.
Schematics here: https://github.com/antoniovillena/zxuno ... o/wifi.sch
You can see it via https://www.schematics.io site.
If you want soldier it by yourself, you need 1 ESP-12E/ESP-12F controller, 10K resistor and some wires(plus opt. row of pin connectors).
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
Re: Log of development zx-uno network tools.
With respect to GPL license, I've publised modified platoremzx sources: https://github.com/nihirash/platotermzx
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
Re: Log of development zx-uno network tools.
If you want do it by yourself you can do it as I.
CAUTION, horrible things inside You may cry a lot tonight after it.
https://artisia.net/dongle/1.jpg
https://artisia.net/dongle/2.jpg
https://artisia.net/dongle/3.jpg
https://artisia.net/dongle/4.jpg
Red connected to last pin.
Other colors goes from first and one by one.
All attached into MIDDLE ROW! It's important!
CAUTION, horrible things inside You may cry a lot tonight after it.
https://artisia.net/dongle/1.jpg
https://artisia.net/dongle/2.jpg
https://artisia.net/dongle/3.jpg
https://artisia.net/dongle/4.jpg
Red connected to last pin.
Other colors goes from first and one by one.
All attached into MIDDLE ROW! It's important!
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
Re: Log of development zx-uno network tools.
nihirash escribió:You need WiFi-addon or VGA+WiFi addon.
You may ask about it Antonio Villena - memberlist.php?mode=viewprofile&u=52
I've made it by myself.
Schematics here: https://github.com/antoniovillena/zxuno ... o/wifi.sch
You can see it via https://www.schematics.io site.
If you want soldier it by yourself, you need 1 ESP-12E/ESP-12F controller, 10K resistor and some wires(plus opt. row of pin connectors).
You will also need the Spectrum core with UART support: viewtopic.php?f=25&t=1361&hilit=uart&start=80#p25844
Re: Log of development zx-uno network tools.
OMG!nihirash escribió:If you want do it by yourself you can do it as I.
CAUTION, horrible things inside You may cry a lot tonight after it.
https://artisia.net/dongle/1.jpg
https://artisia.net/dongle/2.jpg
https://artisia.net/dongle/3.jpg
https://artisia.net/dongle/4.jpg
Red connected to last pin.
Other colors goes from first and one by one.
All attached into MIDDLE ROW! It's important!
That's really ugly
Re: Log of development zx-uno network tools.
Sorryyombo escribió:That's really ugly
I'm software engineer, not hardware
But It works
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
Re: Log of development zx-uno network tools.
I'm curious to know if it would be possible to get this working with the WiFi router on a Toshiba FlashAir via the SDIO protocol.
Re: Log of development zx-uno network tools.
I don't think so.aowen escribió:I'm curious to know if it would be possible to get this working with the WiFi router on a Toshiba FlashAir via the SDIO protocol.
BTW, ZX-Uno version was merged today into mainline platotermzx.
I think about HI-RES version, but maybe just later.
Or feel free to make it by yourself
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
Re: Log of development zx-uno network tools.
So, mainline version here.
Works without beeps. If someone liked it, I'm sorry
Works without beeps. If someone liked it, I'm sorry
- Adjuntos
-
- platoUNO.zip
- (15.04 KiB) Descargado 227 veces
My hardware:
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
ZX Uno 4.2, +UNO, ZX-Evolution Rev. C+VDac+ZXM-SoundCard Extreme+ZiFi, Harlequin 128K, Reverse U8, Leningrad 48K
My blog(and there gopher server on 70th port): https://nihirash.net/
Re: Log of development zx-uno network tools.
Feel free to do an SE Basic IV version and use the native 80 column mode.nihirash escribió:I don't think so.aowen escribió:I'm curious to know if it would be possible to get this working with the WiFi router on a Toshiba FlashAir via the SDIO protocol.
BTW, ZX-Uno version was merged today into mainline platotermzx.
I think about HI-RES version, but maybe just later.
Or feel free to make it by yourself