ZX-Next core para ZX-Uno

Avatar de Usuario
mcleod_ideafix
Mensajes: 831
Registrado: 27 Sep 2015, 00:14
Ubicación: Jerez de la Frontera
Contactar:

Re: ZX-Next core para ZX-Uno

Mensaje por mcleod_ideafix » 21 Jun 2017, 01:08

cherrerap escribió:Lamentablemente no puedo hacer las pruebas sino hasta dentro de unas 6 horas más, pero tan pronto llegue a mi casa del trabajo enciendo mi TV y comienzo de nuevo..
Por la descripción de lo que te ha pasado cuando has ejecutado el test, me da la impresión de que no has usado la última versión del core. No sé cómo accedes al repositorio, pero si es usando un cliente de subversion en tu PC, asegúrate de haber hecho un update.

Sabes que el core es el correcto si es el EXP25-200617. Con el comando .zxunocfg puedes averiguar la versión del core.
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA

Avatar de Usuario
cherrerap
Mensajes: 244
Registrado: 19 Ene 2017, 00:30
Ubicación: Lima / Perú

Re: ZX-Next core para ZX-Uno

Mensaje por cherrerap » 21 Jun 2017, 02:44

Aja!!
Ahora si funciona el programa ntsc.tap
Me parece que ayer no hice un hard reset y por eso estaba seguramente con el core antiguo en memoria, disculpen la confusion pero hoy acabo de encender desde cero el zxuno y con la opcion 5 sale a colores, sin hacer nada, solo encendi el zx-uno.
Cuando escribo .zxconfig confirmo que me da el core que mencionas, el que cargue ayer.

La opcion 1 no muestra cambio aparente, se ve en bn

Opcion 2 blanco y negro pero con interferencia fuerte

Opcion 3 bn pero con tonos de grises mas oscuros
Opcion 4 igual que la 3
Opcipn 5 full color , con el spectrum acelerado

Indiquenme pfv que mas hacer

Avatar de Usuario
cherrerap
Mensajes: 244
Registrado: 19 Ene 2017, 00:30
Ubicación: Lima / Perú

Re: ZX-Next core para ZX-Uno

Mensaje por cherrerap » 21 Jun 2017, 02:53

Perdonen pero por la emocion no vi las ultimas instrucciones.

.zxunocfg -f2 continua viendose a colores
.zxunocfg -f3 con colores, me da la impresion que se ve mejor, con los colores mas fuertes, aunque es ligeramente mejor que el anterior

Al ir subiendo se distorciona completamente el video y no se ve nada desde el f4.. mientras mas subo es peor, pero realmente ya desde f4 no se ve nada en absoluto

fbelavenuto
Mensajes: 100
Registrado: 08 Sep 2016, 13:10

Re: ZX-Next core para ZX-Uno

Mensaje por fbelavenuto » 21 Jun 2017, 13:00

Do a test, change the Joystick to Kempston in the editor module and tests if key 4 stops.
DSpawnZ escribió:Hi Fabio, greetings to you. I've discovered (and ManuFerHi seconded that) that his ZX-Uno board has a problem with TBBlue Core.
Core version 1.08 boots just fine, but as soon it shows the cursor it starts typing a number "4" like for ever.
If you remove the SD card problem stops.
ManuFerHi told that CD pin of SD slot is connected in his board variant and maybe it collides with some input in your Core (maybe some input for the original spectrum keyboard?)
CD pin is connected to pin 12 of the FPGA IO_L49P.

ManuFerHi board variant is this: viewtopic.php?f=27&t=1253

As we don't have the sources, could you check that for us?. I'd really like to test the core.

Thank you.

Avatar de Usuario
DSpawnZ
Mensajes: 33
Registrado: 01 Jun 2017, 04:09
Ubicación: Argentina

Re: ZX-Next core para ZX-Uno

Mensaje por DSpawnZ » 21 Jun 2017, 13:28

Hi Fabio. I've changed joy1 to kempston and no change, 4 keeps typing all the time. Joy2 won't let me change to kempston as soon I change it it reverts to Sinclair.




fbelavenuto escribió:Do a test, change the Joystick to Kempston in the editor module and tests if key 4 stops.
DSpawnZ escribió:Hi Fabio, greetings to you. I've discovered (and ManuFerHi seconded that) that his ZX-Uno board has a problem with TBBlue Core.
Core version 1.08 boots just fine, but as soon it shows the cursor it starts typing a number "4" like for ever.
If you remove the SD card problem stops.
ManuFerHi told that CD pin of SD slot is connected in his board variant and maybe it collides with some input in your Core (maybe some input for the original spectrum keyboard?)
CD pin is connected to pin 12 of the FPGA IO_L49P.

ManuFerHi board variant is this: viewtopic.php?f=27&t=1253

As we don't have the sources, could you check that for us?. I'd really like to test the core.

Thank you.

fbelavenuto
Mensajes: 100
Registrado: 08 Sep 2016, 13:10

Re: ZX-Next core para ZX-Uno

Mensaje por fbelavenuto » 21 Jun 2017, 15:25

Ok, try this new update:

https://drive.google.com/drive/folders/ ... sp=sharing

DSpawnZ escribió:Hi Fabio. I've changed joy1 to kempston and no change, 4 keeps typing all the time. Joy2 won't let me change to kempston as soon I change it it reverts to Sinclair.
fbelavenuto escribió:Do a test, change the Joystick to Kempston in the editor module and tests if key 4 stops.
DSpawnZ escribió:Hi Fabio, greetings to you. I've discovered (and ManuFerHi seconded that) that his ZX-Uno board has a problem with TBBlue Core.
Core version 1.08 boots just fine, but as soon it shows the cursor it starts typing a number "4" like for ever.
If you remove the SD card problem stops.
ManuFerHi told that CD pin of SD slot is connected in his board variant and maybe it collides with some input in your Core (maybe some input for the original spectrum keyboard?)
CD pin is connected to pin 12 of the FPGA IO_L49P.

ManuFerHi board variant is this: viewtopic.php?f=27&t=1253

As we don't have the sources, could you check that for us?. I'd really like to test the core.

Thank you.

Avatar de Usuario
DSpawnZ
Mensajes: 33
Registrado: 01 Jun 2017, 04:09
Ubicación: Argentina

Re: ZX-Next core para ZX-Uno

Mensaje por DSpawnZ » 21 Jun 2017, 16:08

Fabio. It does not boot. It keeps stuck on first screen and there are strange pixels on that screen

https://1drv.ms/i/s!AuntIIHXS2JfhqsHOea0yhf_UwrBOw
fbelavenuto escribió:Ok, try this new update:

https://drive.google.com/drive/folders/ ... sp=sharing

DSpawnZ escribió:Hi Fabio. I've changed joy1 to kempston and no change, 4 keeps typing all the time. Joy2 won't let me change to kempston as soon I change it it reverts to Sinclair.
fbelavenuto escribió:Do a test, change the Joystick to Kempston in the editor module and tests if key 4 stops.
DSpawnZ escribió:Hi Fabio, greetings to you. I've discovered (and ManuFerHi seconded that) that his ZX-Uno board has a problem with TBBlue Core.
Core version 1.08 boots just fine, but as soon it shows the cursor it starts typing a number "4" like for ever.
If you remove the SD card problem stops.
ManuFerHi told that CD pin of SD slot is connected in his board variant and maybe it collides with some input in your Core (maybe some input for the original spectrum keyboard?)
CD pin is connected to pin 12 of the FPGA IO_L49P.

ManuFerHi board variant is this: viewtopic.php?f=27&t=1253

As we don't have the sources, could you check that for us?. I'd really like to test the core.

Thank you.

Avatar de Usuario
cherrerap
Mensajes: 244
Registrado: 19 Ene 2017, 00:30
Ubicación: Lima / Perú

Re: ZX-Next core para ZX-Uno

Mensaje por cherrerap » 21 Jun 2017, 16:25

@mcleod_ideafix, si ayuda en algo, comparto las imagenes:

Encendiendo con el nuevo core y ejecutando el programa NTSC.TAP, sin elegir opcion alguna aun:
Imagen

Ahora, ingresando opcion por opcion:

Opcion 1:
Imagen

Opcion 2:
Imagen

Opcion 3:
Imagen

Opcion 4:
Imagen

Opcion 5: :okidoki;
Imagen

Luego, con la opcion 5 seleccionada:

.zxunocfg -f2:
Imagen

.zxunocfg -f3:
Imagen

Y finalmente, cargando un juego en mi TV CRT NTSC, luego de seguir los pasos descritos anteriormente:
Imagen

Saludos, y gracias !

Avatar de Usuario
mcleod_ideafix
Mensajes: 831
Registrado: 27 Sep 2015, 00:14
Ubicación: Jerez de la Frontera
Contactar:

Re: ZX-Next core para ZX-Uno

Mensaje por mcleod_ideafix » 21 Jun 2017, 16:38

De nada. Pues ya sabes. En cuanto se pueda, se añadirá esta opción a la BIOS para que desde el principio arranques el ZX-UNO en modo NTSC. Comentar que no es que vaya más rápido el Spectrum. En modo NTSC la CPU va a la misma velocidad que en PAL, pero las interrupciones ocurren 60 veces por segundo en lugar de 50 veces, con lo que algunos eventos sí que ocurrirán más rapidamente. De hecho algunos juegos puede que dejen de verse bien, o incluso que no puedan usarse, porque esperan una cierta cantidad de ciclos de reloj por frame, y en NTSC son menos ciclos.
http://www.zxuno.com
ZX-Uno · Clon de ordenador ZX Spectrum basado en FPGA

fbelavenuto
Mensajes: 100
Registrado: 08 Sep 2016, 13:10

Re: ZX-Next core para ZX-Uno

Mensaje por fbelavenuto » 21 Jun 2017, 16:40

Ok, wait a little, in home I'll try to figure this trouble.
DSpawnZ escribió:Fabio. It does not boot. It keeps stuck on first screen and there are strange pixels on that screen

https://1drv.ms/i/s!AuntIIHXS2JfhqsHOea0yhf_UwrBOw

Responder