Vanfanel escribió:@fabio: Great update!! I have been trying PAL games and they run great now!! (For example, Invasion of the Zombie Monsters runs at the right speed now!)
However, if I set PAL in config.txt, and reboot via CTRL+ALT+SUP, I am in NTSC mode again. Could it be a bug?
Resetting via CTRL+ALT+F12 reboots in PAL again.
New MSX1 core
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: New MSX1 core
Oops!! BUG!!!
Re: New MSX1 core
@fabio: also, PAL color encoding seems to have another bug: it gives black and white image UNLESS you enter the ZX-UNO BIOS before booting in PAL.
If you boot directly, you get black and white PAL image. (My TV is PAL).
If you boot directly, you get black and white PAL image. (My TV is PAL).
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: New MSX1 core
Strange!
I'll try to fix crystal frequency in 3.57.
I'll try to fix crystal frequency in 3.57.
Vanfanel escribió:@fabio: also, PAL color encoding seems to have another bug: it gives black and white image UNLESS you enter the ZX-UNO BIOS before booting in PAL.
If you boot directly, you get black and white PAL image. (My TV is PAL).
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: New MSX1 core
Vanfael, please test the "COREX(BETA).ZX1" file.
fbelavenuto escribió:Strange!
I'll try to fix crystal frequency in 3.57.
Vanfanel escribió:@fabio: also, PAL color encoding seems to have another bug: it gives black and white image UNLESS you enter the ZX-UNO BIOS before booting in PAL.
If you boot directly, you get black and white PAL image. (My TV is PAL).
Re: New MSX1 core
@fabio:
This version:
-Does not go back to NTSC anymore on CTRL+ALT+SUP. Great!
-Does show colors in PAL mode as expected without having to enter the ZXUNO BIOS menu. Great too!
-There is an invisible area at the lower part of the screen in PAL mode, as if image was too large for TV. This is the only failure I have seen.
This version:
-Does not go back to NTSC anymore on CTRL+ALT+SUP. Great!
-Does show colors in PAL mode as expected without having to enter the ZXUNO BIOS menu. Great too!
-There is an invisible area at the lower part of the screen in PAL mode, as if image was too large for TV. This is the only failure I have seen.
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
Re: New MSX1 core
Hola Fabio:
Muchas gracias por tu gran trabajo con este core. Me estoy divirtiendo mucho cargando ficheros .ROM, .CAS y .DSK.
Pero he intentado grabar un programa BASIC desde MSX-BASIC con el comando SAVE "A:HOLA.BAS" y el led rojo de que el ZX-UNO está usando la tarjeta SD parpadea, pero no termina de finalizar la grabación. Si hago RESET (CTRL+ALT+F12) y hago un DIR del directorio raíz veo esto:
¿Se puede usar el comando SAVE con tu core?
Muchas gracias por tu gran trabajo con este core. Me estoy divirtiendo mucho cargando ficheros .ROM, .CAS y .DSK.
Pero he intentado grabar un programa BASIC desde MSX-BASIC con el comando SAVE "A:HOLA.BAS" y el led rojo de que el ZX-UNO está usando la tarjeta SD parpadea, pero no termina de finalizar la grabación. Si hago RESET (CTRL+ALT+F12) y hago un DIR del directorio raíz veo esto:
Código: Seleccionar todo
HOLA BAS 0 15-02-17
102337K in 28 files 0 bytes free
Re: New MSX1 core
Hi, Fabio!
(sorry for my bad english)
Thank you very much,VGA-version to be working well on my dev-boards AEON.
But on the DE1 i can not make a version for the VGA,
for scan doubler-a apparently not enough internal memory
Thank you.
(sorry for my bad english)
Thank you very much,VGA-version to be working well on my dev-boards AEON.
But on the DE1 i can not make a version for the VGA,
for scan doubler-a apparently not enough internal memory
This is possible as it is correct ??Info (170034): Selected device has 52 memory locations of type M4K. The current design requires 53 memory locations of type M4K to successfully fit.
Info (170033): Memory usage required for the design in the current device: 102% M4K memory block locations required
Thank you.
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: New MSX1 core
Some bug!! The SAVE command should work!
desUBIKado escribió:Hola Fabio:
Muchas gracias por tu gran trabajo con este core. Me estoy divirtiendo mucho cargando ficheros .ROM, .CAS y .DSK.
Pero he intentado grabar un programa BASIC desde MSX-BASIC con el comando SAVE "A:HOLA.BAS" y el led rojo de que el ZX-UNO está usando la tarjeta SD parpadea, pero no termina de finalizar la grabación. Si hago RESET (CTRL+ALT+F12) y hago un DIR del directorio raíz veo esto:
¿Se puede usar el comando SAVE con tu core?Código: Seleccionar todo
HOLA BAS 0 15-02-17 102337K in 28 files 0 bytes free
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: New MSX1 core
Yes, unfortunately there is no space on the DE-1 board!
azesmbog escribió:Hi, Fabio!
(sorry for my bad english)
Thank you very much,VGA-version to be working well on my dev-boards AEON.
But on the DE1 i can not make a version for the VGA,
for scan doubler-a apparently not enough internal memory
This is possible as it is correct ??Info (170034): Selected device has 52 memory locations of type M4K. The current design requires 53 memory locations of type M4K to successfully fit.
Info (170033): Memory usage required for the design in the current device: 102% M4K memory block locations required
Thank you.
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
Re: New MSX1 core
Hola Fabio:
Una pregunta sobre MSX-DOS. ¿Es correcto que al poner MODE 41, MODE 42, ... MODE 80 devuelva el error *** Invalid parameter?
Si pongo un valor entre 1 y 40 funciona correctamente, y pone ese número de columnas por fila.
Una pregunta sobre MSX-DOS. ¿Es correcto que al poner MODE 41, MODE 42, ... MODE 80 devuelva el error *** Invalid parameter?
Si pongo un valor entre 1 y 40 funciona correctamente, y pone ese número de columnas por fila.