Página 1 de 1

Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Publicado: 05 May 2017, 22:00
por desUBIKado
In this repository there is a core versión without vga output.

https://drive.google.com/drive/folders/ ... TFFR2QxdzA

ManuFerHi shared a new versión for 2MB board with vga output synthesized by Fabio, but is unstable on Zx-Uno 4.1 512 KB board.

download/file.php?id=1148

@Fabio, please, Could you synthesize a .ZX1 file for the ZX-Uno 4.1 512 KB board?

Thanks in advance.

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Publicado: 16 May 2017, 15:44
por fbelavenuto
I'll take a look.
desUBIKado escribió:In this repository there is a core versión without vga output.

https://drive.google.com/drive/folders/ ... TFFR2QxdzA

ManuFerHi shared a new versión for 2MB board with vga output synthesized by Fabio, but is unstable on Zx-Uno 4.1 512 KB board.

download/file.php?id=1148

@Fabio, please, Could you synthesize a .ZX1 file for the ZX-Uno 4.1 512 KB board?

Thanks in advance.

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Publicado: 20 May 2017, 15:02
por desUBIKado
fbelavenuto escribió:I'll take a look.
Hi Fabio:

Thanks for your time. When I said "unstable" I wanted to say this:
  • After a "Hard Reset", the ZX-Uno may charge any game or do not load any.
  • If I press some times ESC/BREAK key to change a game, finally don't load the game, or crash.
colecovision_crash.jpg

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Publicado: 20 May 2017, 21:38
por fbelavenuto

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Publicado: 21 May 2017, 02:13
por desUBIKado
This versión works fine, but VGA isn't set by default (I must press Home key to see anything in my LCD monitor), and there are not scanlines, and with scanlines the image improves a lot.

Could you make a config.txt file as there is in msx core to activate/desactivate VGA and scanlines?

Thanks a lot.

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Publicado: 30 Abr 2020, 17:59
por desUBIKado
desUBIKado escribió:
21 May 2017, 02:13
This versión works fine, but VGA isn't set by default (I must press Home key to see anything in my LCD monitor), and there are not scanlines, and with scanlines the image improves a lot.

Could you make a config.txt file as there is in msx core to activate/desactivate VGA and scanlines?

Thanks a lot.
Bueno, lo que no hizo Fabio hace tres años lo ha hecho Fernando Mosquera esta mañana. Ha sintetizado la versión 1.2 con salida VGA y "scanlines". Ahora ya tenemos una versión que funciona perfectamente, la 1.1 a veces cuando cargabas un juego luego ya no cargaba otro, y con esos scanlines que hace que gane mucho.

Os lo paso para el que quiera probarlo (recordad que es solo para VGA)

colecovision_(1.2_vga_scanlines).ZX1.zip
(65.8 KiB) Descargado 62 veces

¡Muchas gracias Fernando!