Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Avatar de Usuario
desUBIKado
Mensajes: 566
Registrado: 05 Ago 2016, 22:33

Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Mensajepor desUBIKado » 05 May 2017, 22:00

In this repository there is a core versión without vga output.

https://drive.google.com/drive/folders/ ... TFFR2QxdzA

ManuFerHi shared a new versión for 2MB board with vga output synthesized by Fabio, but is unstable on Zx-Uno 4.1 512 KB board.

download/file.php?id=1148

@Fabio, please, Could you synthesize a .ZX1 file for the ZX-Uno 4.1 512 KB board?

Thanks in advance.

fbelavenuto
Mensajes: 98
Registrado: 08 Sep 2016, 13:10

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Mensajepor fbelavenuto » 16 May 2017, 15:44

I'll take a look.

desUBIKado escribió:In this repository there is a core versión without vga output.

https://drive.google.com/drive/folders/ ... TFFR2QxdzA

ManuFerHi shared a new versión for 2MB board with vga output synthesized by Fabio, but is unstable on Zx-Uno 4.1 512 KB board.

download/file.php?id=1148

@Fabio, please, Could you synthesize a .ZX1 file for the ZX-Uno 4.1 512 KB board?

Thanks in advance.

Avatar de Usuario
desUBIKado
Mensajes: 566
Registrado: 05 Ago 2016, 22:33

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Mensajepor desUBIKado » 20 May 2017, 15:02

fbelavenuto escribió:I'll take a look.


Hi Fabio:

Thanks for your time. When I said "unstable" I wanted to say this:

  • After a "Hard Reset", the ZX-Uno may charge any game or do not load any.
  • If I press some times ESC/BREAK key to change a game, finally don't load the game, or crash.

colecovision_crash.jpg


Avatar de Usuario
desUBIKado
Mensajes: 566
Registrado: 05 Ago 2016, 22:33

Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)

Mensajepor desUBIKado » 21 May 2017, 02:13



This versión works fine, but VGA isn't set by default (I must press Home key to see anything in my LCD monitor), and there are not scanlines, and with scanlines the image improves a lot.

Could you make a config.txt file as there is in msx core to activate/desactivate VGA and scanlines?

Thanks a lot.


Volver a “Colecovision”

¿Quién está conectado?

Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 2 invitados