In this repository there is a core versión without vga output.
https://drive.google.com/drive/folders/ ... TFFR2QxdzA
ManuFerHi shared a new versión for 2MB board with vga output synthesized by Fabio, but is unstable on Zx-Uno 4.1 512 KB board.
download/file.php?id=1148
@Fabio, please, Could you synthesize a .ZX1 file for the ZX-Uno 4.1 512 KB board?
Thanks in advance.
Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)
I'll take a look.
desUBIKado escribió:In this repository there is a core versión without vga output.
https://drive.google.com/drive/folders/ ... TFFR2QxdzA
ManuFerHi shared a new versión for 2MB board with vga output synthesized by Fabio, but is unstable on Zx-Uno 4.1 512 KB board.
download/file.php?id=1148
@Fabio, please, Could you synthesize a .ZX1 file for the ZX-Uno 4.1 512 KB board?
Thanks in advance.
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)
Hi Fabio:fbelavenuto escribió:I'll take a look.
Thanks for your time. When I said "unstable" I wanted to say this:
- After a "Hard Reset", the ZX-Uno may charge any game or do not load any.
- If I press some times ESC/BREAK key to change a game, finally don't load the game, or crash.
-
- Mensajes: 100
- Registrado: 08 Sep 2016, 13:10
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)
This versión works fine, but VGA isn't set by default (I must press Home key to see anything in my LCD monitor), and there are not scanlines, and with scanlines the image improves a lot.
Could you make a config.txt file as there is in msx core to activate/desactivate VGA and scanlines?
Thanks a lot.
- desUBIKado
- Mensajes: 1002
- Registrado: 05 Ago 2016, 22:33
Re: Request: Colecovision CORE.ZX1 with VGA output for ZX-UNO 4.1 (512 KB)
Bueno, lo que no hizo Fabio hace tres años lo ha hecho Fernando Mosquera esta mañana. Ha sintetizado la versión 1.2 con salida VGA y "scanlines". Ahora ya tenemos una versión que funciona perfectamente, la 1.1 a veces cuando cargabas un juego luego ya no cargaba otro, y con esos scanlines que hace que gane mucho.desUBIKado escribió: ↑21 May 2017, 02:13This versión works fine, but VGA isn't set by default (I must press Home key to see anything in my LCD monitor), and there are not scanlines, and with scanlines the image improves a lot.
Could you make a config.txt file as there is in msx core to activate/desactivate VGA and scanlines?
Thanks a lot.
Os lo paso para el que quiera probarlo (recordad que es solo para VGA)
¡Muchas gracias Fernando!