Soporte para Flash W25Q128

BCH
Mensajes: 170
Registrado: 01 May 2016, 10:55

Re: Soporte para Flash W25Q128

Mensaje por BCH » 23 Feb 2017, 02:11

Yo tambien he actualizado la flash y es una pasada tener todos los cores disponibles dentro del zxuno. Como dice ManuFerHi, con aire caliente y pasta se hace en un momento.

Avatar de Usuario
bakoulis
Mensajes: 187
Registrado: 12 Sep 2016, 10:36

Re: Soporte para Flash W25Q128

Mensaje por bakoulis » 25 Feb 2017, 13:26

If I order one from here, is the correct type of chip?
http://www.ebay.com/itm/1x-W25Q128FV-W2 ... Sw9mFWImt-

:zxuno:

Avatar de Usuario
carmeloco
Mensajes: 751
Registrado: 25 Dic 2015, 12:02

Re: Soporte para Flash W25Q128

Mensaje por carmeloco » 25 Feb 2017, 13:46

bakoulis escribió:If I order one from here, is the correct type of chip?
http://www.ebay.com/itm/1x-W25Q128FV-W2 ... Sw9mFWImt-

:zxuno:
Yes. :okidoki;

Avatar de Usuario
bakoulis
Mensajes: 187
Registrado: 12 Sep 2016, 10:36

Re: Soporte para Flash W25Q128

Mensaje por bakoulis » 25 Feb 2017, 14:11

carmeloco escribió:
bakoulis escribió:If I order one from here, is the correct type of chip?
http://www.ebay.com/itm/1x-W25Q128FV-W2 ... Sw9mFWImt-

:zxuno:
Yes. :okidoki;
:gracias!:

Avatar de Usuario
bakoulis
Mensajes: 187
Registrado: 12 Sep 2016, 10:36

Re: Soporte para Flash W25Q128

Mensaje por bakoulis » 25 Feb 2017, 14:44

Just ordered. A last question.
When de-soldered the old chip and soldered the new one, can I flash the board first time from SD, or is like a bricked board?
:?:

ManuFerHi
Mensajes: 752
Registrado: 15 Nov 2015, 17:50

Re: Soporte para Flash W25Q128

Mensaje por ManuFerHi » 25 Feb 2017, 16:05

bakoulis escribió:Just ordered. A last question.
When de-soldered the old chip and soldered the new one, can I flash the board first time from SD, or is like a bricked board?
:?:
brick board! you need a flash chip with a preinstalled firmware or a system recovery like cable xilinx, altera, RPi, etc.

Avatar de Usuario
bakoulis
Mensajes: 187
Registrado: 12 Sep 2016, 10:36

Re: Soporte para Flash W25Q128

Mensaje por bakoulis » 25 Feb 2017, 16:15

ManuFerHi escribió:
bakoulis escribió:Just ordered. A last question.
When de-soldered the old chip and soldered the new one, can I flash the board first time from SD, or is like a bricked board?
:?:
brick board! you need a flash chip with a preinstalled firmware or a system recovery like cable xilinx, altera, RPi, etc.
:gracias!:

Avatar de Usuario
carmeloco
Mensajes: 751
Registrado: 25 Dic 2015, 12:02

Re: Soporte para Flash W25Q128

Mensaje por carmeloco » 25 Feb 2017, 16:33

I write the flash before solder it, with a MiniPro TL866 programmer. Never use this programmer with the flash soldered.

BCH
Mensajes: 170
Registrado: 01 May 2016, 10:55

Re: Soporte para Flash W25Q128

Mensaje por BCH » 25 Feb 2017, 18:11

I've bought something like this:
http://www.ebay.es/itm/CH341A-24-25-Ser ... Sw2GlXIKDG
The only problem is that the software does not have the option to set the QE flag (at least I could not find it).

Avatar de Usuario
carmeloco
Mensajes: 751
Registrado: 25 Dic 2015, 12:02

Re: Soporte para Flash W25Q128

Mensaje por carmeloco » 26 Feb 2017, 00:02

BCH escribió:I've bought something like this:
http://www.ebay.es/itm/CH341A-24-25-Ser ... Sw2GlXIKDG
The only problem is that the software does not have the option to set the QE flag (at least I could not find it).
Some programmers, don't have the QE option. I have too a Genius G540, and don't has the QE option.

Responder