Nuevo gestor NMI.SYS para ESXDOS

Discursiones en general sobre el proyecto que no tienen cabida en otro foro / General discussion for uncateorized topics about the ZX-Uno project
Avatar de Usuario
desUBIKado
Mensajes: 753
Registrado: 05 Ago 2016, 22:33

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por desUBIKado » 29 Dic 2017, 21:39

Nueva versión 0.0.14 Edición Navidades 2017

Mejora la compatibilidad con los ficheros TRD ya que ahora usa el mismo método que el antiguo NMI

Versión 0.0.14 http://board.esxdos.org/viewtopic.php?pid=611#p611

Cambios:
- Max overlay size changed to 765 bytes, need recompile custom module (M).

- Open a .TRD file now uses same method than old NMI handler. There are three options available:
  • ENTER: Try to autoboot disk, if it fails then open TR-DOS Navigator with disk attached to drive A (like old NMI handler).
  • CS+ENTER: Enter TR-DOS mode with disk attached to drive A (supported by the API).
  • SS+ENTER: Open TR-DOS Navigator with disk attached to drive A (my method revisited).
Known problems:

My NMI navigator works on versions from v0.8.5 to v0.8.6 beta 4. On version v0.8.6 beta 5.1 load .BAS files don't work.
Now, all the TRDs that work with the old NMI navigator should work with the new one. Guys, please check it!

Avatar de Usuario
desUBIKado
Mensajes: 753
Registrado: 05 Ago 2016, 22:33

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por desUBIKado » 22 Feb 2018, 23:18

Nueva versión 0.0.15 http://board.esxdos.org/viewtopic.php?pid=662#p662

Cambios:
M Max overlay size changed to 693 bytes, need recompile custom module.

E, DELETE now deletes directories recursively. Needs rm dot command. PLEASE USE WITH CARE. Luzie :D

LEFT, RIGHT navigation keys have new behavior. Hood :D

G open MON debugger/monitor. Velesoft :D

OUT 255, 0 on browser start. This OUT set standard graphic zx mode on computers Timex2048,Timex2068 and on SLAM. Velesoft :D

Fixed bug reported by mcleod_ideafix. mcleod :D

Avatar de Usuario
SevenFFF
Mensajes: 43
Registrado: 23 Dic 2017, 22:50

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por SevenFFF » 23 Feb 2018, 02:22

Ooh, nice. Would it be possible to turn Radastan mode off also. I have to navigate by memory using 0.1.14 with my Radastan project.

Love the NMI manager though. Thanks!
Robin Verhagen-Guest
SevenFFF / Threetwosevensixseven / colonel32
seven-fff.com/blog

Avatar de Usuario
Uto
Mensajes: 1385
Registrado: 17 Dic 2015, 16:39

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por Uto » 23 Feb 2018, 06:58

SevenFFF escribió:Ooh, nice. Would it be possible to turn Radastan mode off also. I have to navigate by memory using 0.1.14 with my Radastan project.

Love the NMI manager though. Thanks!
In fact turning off timex modes is a bad idea, as when you get back to game you are still in normal mode. Turning off radastan mode would have even worse result.

That would only have sense if mode is restored before exiting NMI menú which is not the case.

Avatar de Usuario
SevenFFF
Mensajes: 43
Registrado: 23 Dic 2017, 22:50

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por SevenFFF » 23 Feb 2018, 20:43

Yes, that's a very good point.
Robin Verhagen-Guest
SevenFFF / Threetwosevensixseven / colonel32
seven-fff.com/blog

Avatar de Usuario
desUBIKado
Mensajes: 753
Registrado: 05 Ago 2016, 22:33

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por desUBIKado » 03 Mar 2018, 19:18

Dr. Slump (aka David Pesqueira Souto) ha sacado un fichero README.TXT con instrucciones para instalar y usar su gestor NMI para esxDOS,

http://board.esxdos.org/viewtopic.php?pid=701#p701

Avatar de Usuario
desUBIKado
Mensajes: 753
Registrado: 05 Ago 2016, 22:33

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por desUBIKado » 24 Sep 2018, 21:21

Nueva versión 0.0.16

http://board.esxdos.org/viewtopic.php?pid=1012#p1012

Cambios:
  • Enter now open .ROM files with Velesoft's ownrom dotcommand. It's neccesary copy it to /BIN. Luzie
  • Enter now treat no extension files as .BAS files. dontbugster

Avatar de Usuario
desUBIKado
Mensajes: 753
Registrado: 05 Ago 2016, 22:33

Re: Nuevo gestor NMI.SYS para ESXDOS

Mensaje por desUBIKado » 05 Oct 2019, 10:42

Actualización de la versión 0.0.16 para trabajar correctamente con la versión 0.8.7 de esxDOS, así como actualización de todos todo los comandos punto que usa el navegador NMI del Dr.Slump

Fuente: http://board.esxdos.org/viewtopic.php?pid=1370#p1370

Hello,

Original esxdos087.zip published by lordcoxis include old versions of my dot commands. I collect last versions of it plus other utilities and configure a 0.8.7 system that use my NMI navigator. Is available at https://www.dropbox.com/s/28zmjs5505o13 ... 7.zip?dl=0

Update release of NMI navigator, v.0.0.16:
https://www.dropbox.com/s/85lkaohu22bcz ... 6.zip?dl=0

Changes:
  • Updated \SYS\NMI\init to detect 0.8.7 esxDOS version
  • Added \SYS\NMI\old087.sys to able to load old NMI navigator for 0.8.7 esxDOS version
  • Added READ_NMI.txt
  • Added \BIN\ dot commands used by NMI navigator: DRIVES, HEXVIEW, MON, OWNROM and RM.
Packed release of custom module, v.0.0.16 (it is identical to the version v.0.0.15):
https://www.dropbox.com/s/obv9d99cqld92 ... 6.zip?dl=0

Updated README (now READ_NMI.txt):
https://www.dropbox.com/s/fco7dkmkoeahp ... I.txt?dl=0
Please read it! It contains an instruction manual and explains the operation of all the keys.

Responder