Se encontraron 81 coincidencias
- 17 Mar 2019, 12:47
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: Quiero instalar Ts-Conf en ZX Evolution
- Respuestas: 14
- Vistas: 11810
Re: Quiero instalar Ts-Conf en ZX Evolution
Personally, I rather like the default base configuration, but I'm told that installing TS-conf is apparently quite straight forward... You'll need to first download the appropriate ROM and firmware files, stick them on an SD card, plug them in, then turn on the ZX Evo with F12 (softreset) held down ...
- 04 Feb 2019, 18:05
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
Confirmed: DIV_GMX works FINE with the ZX Evo!
Iv just figured out what was causing my beeper sound problem, and it was not the DivGMX card!... Iv just sent this email to Vlad, and want it on record that this card works fine with the ZX Evo... My sound problem was due to an Evo feature triggered by a hotkey that I didn't know about that turns th...
- 02 Feb 2019, 09:15
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
Re: DivGMX
You'll have to forgive my photography, but after the 2nd failed attempt with a bad camera, I did get a few shots. Iv zipped them up and put them on drop box to be downloaded here: https://www.dropbox.com/s/v9gvlesi0f882kj/DivGMX.zip?dl=1 They should at least give you an idea of where the DivGMX card...
- 30 Ene 2019, 23:07
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
Re: DivGMX
To weirdocollector: I have the DivGMX slotted into ZXBus 1 on the EVO. The card itself is actually shorter than the full length of the Evo's ZXBus slot, but it fits nicely. I have the card shifted towards the back of the Evo (closer to the output sockets) in the ZX Bus, orientated with the video soc...
- 30 Ene 2019, 10:13
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
YAY!... I have it!!!
I finally have your package!!!... I have installed it into the ZX Evo successfully!... Beeper is having a few issues, but otherwise the other features seem to work with your pre-configured firmware so far... General sound is very impressive... SAA works but is very quiet, and Iv seen turbosound work...
- 15 Ene 2019, 17:07
- Foro: General / Uncategorized
- Tema: Como desbrickear el ZX-Uno con USB Blaster
- Respuestas: 7
- Vistas: 9632
Re: Como desbrickear el ZX-Uno con USB Blaster
Thanks, Antonio, I was hoping that was the case...
- 15 Ene 2019, 06:52
- Foro: General / Uncategorized
- Tema: Como desbrickear el ZX-Uno con USB Blaster
- Respuestas: 7
- Vistas: 9632
Re: Como desbrickear el ZX-Uno con USB Blaster
A slightly off topic question for Antonio: After looking through your instructions on debricking the ZX Uno using a USB Blaster, am I right in thinking that you don't need to download the whole Quantus II package of drivers in order to use the USB Blaster kit for flashing firmware?... The reason I a...
- 19 Nov 2018, 06:12
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
Re: DivGMX
Sorry about the mess up earlier with the name on the money order Vlad - Iv have finally managed to cancel that order and have now resent your money, with a new transfer via Western Union. Please read your PM for the tracking code and details... Thanks again for your patience... Regards... Karl
- 14 Nov 2018, 00:12
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
Re: DivGMX
Looking forward to trying it out!... Thanks Vlad!!!!...
- 11 Nov 2018, 20:07
- Foro: Otros sistemas FPGA / Another FPGA systems
- Tema: DivGMX
- Respuestas: 23
- Vistas: 21695
Money sent
Change my mind again... Iv just sent $57 USD to you Vlad, using the details you sent me... Iv sent a PM with the tracking number for you, and my postage address... Thanks for your patience...